YOU MUST KEEP MANTA'S COOL!
 
An over heated Manta is a DEAD Manta
 
If you can blow lots of cool air inside them during vigorous applications then the dependability is excellent!
BUT if you allow them to get burning hot then the rotor may warp. Project engineers and designers be warned!
 
Method #1 - High air pressure
 
For 100% duty use or extreme racing applications you may
wish to add a stream of compressed air at this point ->
2 CFM@50 PSI for cooling rotor in extreme high amperage situations
 
 
BE SURE TO USE LARGE GAUGE "00" WIRES
ESPECIALLY ON 12 VOLT ENGINE DRIVEN PMG's
 
WARNING:
This motor is NOT an ordinary motor
and should be handled with GREAT care.
 
It is very capable of serious power and should always
be completely secured before applying any power to it!!
 
The Manta includes a 30 day repair only warranty.
Over heated motors will not be warranted.
Be sure to provide adequate ventilation and not run to hot!!